2410(2.7x6.1)贴片保险丝

Description：

The SMD2410 fuse is RoHS compliant,Halogen Free and 100% lead-free. This product is fully compatible with lead-free solder alloys and higher temperature profiles associated with lead-free assembly.The SMD2410 design has enhanced inrush withstand characteristics over . The unique time delay feature of this fuse design helps solve the problem of nuisance “opening” by accommodating inrush currents that normally cause a fast-acting fuse to open。

Features：

• Lead-free and Halogen Free • Time-lag• Small size • Wide range of current ratings available • Wide operating temperature range• Low temperature de-rating

Applications：

Secondary protection for space constrained applications:

• Notebook PC • LCD/PDP TV • LCD monitor • LCD/PDP panel • LCD backlight inverter • Portable DVD player • Power supply• Networking • PC server • Cooling fan system • Storage system • Telecom system • Wireless basestation • Game console • Office Automation equipment • Battery charging circuit protection • Industrial equipment• Medical equipment • Automotive

Material Details

NO.	Part Name	Material
1	End caps	Copper Plating/Silver
2	Body	Ceramic Tube
3	Fuse	Alloy wire
4	Explosion proof sand	quartz sand

Electrical Characteristics for Series

% of Ampere rating	OpeningTime
100%	4 hours, Minimum
200%	1 sec., Min.; 60 sec., Max.
300%	0.2 sec., Min.; 3 sec., Max
800%	0.02 sec., Min.; 0.1 sec., Max.

Electrical Specifications by Item

Ampere Rating (A)	Amp Code	MaxVoltage Rating(V)	Interrupting Rating	Nominal Cold Resistance (Ohms)	Nominal Melting I2t (A2sec)	Agency Approvals
Ampere Rating (A)	Amp Code	MaxVoltage Rating(V)	Interrupting Rating	Nominal Cold Resistance (Ohms)	Nominal Melting I2t (A2sec)	UL	CE
0.063	.63	125/250	50 amperes @300VAC 50 amperes @250VAC/DC 200amperes @125VAC	10.362	0.00278	x	x
0.080	.80	125/250		6.852	0.00496	x	x
0.100	.10	125/250		5.853	0.0072	x	x
0.160	.16	125/250		2.254	0.015	x	x
0.200	.20	125/250		1.8731	0.062	x	x
0.250	.25	125/250		1.458	0.065	x	x
0.315	.315	125/250		0.9345	0.148	x	x
0.375	.375	125/250		0.8965	0.334	x	x
0.400	.400	125/250		0.6754	0.483	x	x
0.500	.500	125/250		0.4587	0.698	x	x
0.630	.630	125/250		0.3455	0.845	x	x
0.750	.750	125/250		0.3080	0.957	x	x
0.800	.800	125/250		0.2743	1.49	x	x
1.00	001.	125/250		0.1624	1.76	x	x
1.50	01.5	125/250		0.1186	4.70	x	x
1.60	01.6	125/250		0.0750	6.80	x	x
2.00	002.	125/250		0.0636	8.53	x	x
2.50	02.5	125/250		0.0400	13.18	x	x
3.00	003.	125/250		0.0352	19.55	x	x
3.50	03.5	125/250		0.0261	32.70	x	x
4.00	004.	125/250		0.0227	40.80	x	x
5.00	005.	125/250		0.0171	59.59	x	x
6.00	006.	125/250		0.0168	61.38	x	x
7.00	007.	125/250		0.0161	63.50	x	x
8.00	008.	125/250		0.0153	65.80	x	x
10.00	010.	125/250		0.0145	70.31	x	x
12.00	012.	125/250		0.0115	80.52	x	x
15.00	015.	125/250		0.0038	153.78	x	x
16.00	016.	72VDC	500amperes @72VDC	0.0028	215.25	x	x
20.00	020.	72VDC		0.0020	358.08	x	x
25.00	025.	72VDC		0.00158	465.17	x	x
30.00	030.	72VDC		0.00145	989.65	x	x
35.00	035.	72VDC		0.00133	1011.38	x	x
40.00	040.	63VDC		0.00120	1050.78	x	x
50.00	050.	63VDC		0.00117	1189.23	x	x

Notes: - l2t calculated at 8ms. Resistance is measured at 10% of rated current, 25ºC

Temperature Derating Curve

Notes:
1. Derating depicted in this curve is in addition to the standard derating of 20% for continuous operation.
Example:For continuous operation at 75 degrees celsius, the fuse should be derated as follows:I = (0.80)(0.85)IRAT= (0.68)IRAT

Average Time Current Curves

Soldering Parameters

Reflow Condition	Pb – Free assembly
Pre Heat	- Temperature Min (Ts(min)) 150°C
	- Temperature Max (Ts(max)) 200°C
	- Time (Min to Max) (ts) 60 – 120 secs
Average ramp up rate (Liquidus Temp (TL) to peak	3°C/second max.
TS(max) to TL - Ramp-up Rate	3°C/second max.
Reflow	- Temperature (TL) (Liquidus) 217°C
Reflow	- Temperature (tL) 60 – 90 seconds
Peak Temperature (TP)	260+0/–5 °C
Time within 5°C of actual peak Temperature (tp)	20 – 40 seconds
Ramp-down Rate	5°C/second max.
Time 25°C to peak Temperature (TP)	8 minutes max.
Do not exceed	260°C
Wave Soldering Parameters	260°C Peak Temperature,3 seconds max.

Product Characteristics

Materials	Body: Ceramic Terminations: Gold-plated Caps
Product Marking	Brand, Amperage Rating
Operating Temperature	-55°C to 125°C
Moisture Sensitivity Level	Level 1, J-STD-020C
Solderability	MIL-STD-202, Method 208
Insulation Resistance (after Opening)	MIL-STD-202, Method 302, Test ConditionA (10,000 ohms minimum)
Thermal Shock	MIL-STD-202, Method 107, Test Condition B, 5 cycles, -65°C to 125°C, 15 minutes @ each extreme
Mechanical Shock	MIL-STD-202, Method 213, Test I:Deenergized. 100G’s pk amplitude, sawtooth wave 6ms duration, 3 cycles XYZ+xyz = 18 shocks
Vibration	MIL-STD-202, Method 201: 0.03" amplitude, 10-55 Hz in 1 min. 2hrs each XYZ=6hrs
Moisture Resistance	MIL-STD-202, Method 106, 10 cycles
Salt Spray	MIL-STD-202, Method 101, Test Condition B (48hrs)
Resistance to Soldering Heat	MIL-STD-202, Method 210, Test condition B (10 sec at 260°C)

Dimensions

Packaging

packaging Option	packaging Specification	Quantity	Quantity &packaging code
12mm Tape and Reel	EIA RS-481-2 (IEC 286, part 3)	1500	WR

东莞市富宽源电子有限公司（东莞市富源电子科技有限公司）成立于1998年，主要从事安规元器件生产和销售，通过10年的改革和努力现在的富宽源已经成为集生产和销售为一体的安规元器件总汇；富宽源将继续秉持品质第一、服务客户的原则不断为广大客户提供质优价廉的产品。我公司目前主要提供如下产品: 电流保险丝-CurrentFuse 玻璃管电流保险丝陶瓷管电流保险丝贴片电流保险丝电阻式保险丝微型电流保险丝高压电流保险丝直流电流保险丝交流电流保险丝 SMD-贴片式自恢复保险丝 AI-插件式自恢复保险丝保险丝座-Fuseholder ESTMF系列保险丝座 EDKFH系列保险丝座 SKPTF系列保险丝座 AUTO--汽车保险丝座 OPWOP系列保险丝座拉线盒式保险丝座保险丝夹&端子保险管座保险座大电流|高压保险座温度保险丝-Thermalcutoffs 方块形温度保险丝电阻式温度保险丝大电流温度保险丝陶瓷温度保险丝铁壳温度保险丝 SW.C温度保险丝 NEC温度保险丝艾默生温度保险丝内桥温度保险丝松下温度保险丝 AUPO温度保险丝温度开关/温控器-Thermalprotector 热保护器/可恢复温控器风筒式温控开关/温控器马达热保护器/温控器除霜除湿温控器/温控开关超低温温控开关/温控器微型温控开关/温控器温度开关/温控器-Thermalprotector 7AM/17AM温控器 KSD301系列温开关 KSD-01F插脚温开关 9700系列方块形温控开关 BR系列温控开关 SEKIST-22温控器压敏电阻-Varistors 压敏电阻氧化锌压敏阻器贴片压敏电阻 SMD压敏电阻插件型压敏电阻高能压敏电阻汽车保险丝Autofuse/carfuse 小号汽车插片保险丝FY-MIN 中号汽车插片保险丝FY-ATC 大号汽车插片保险丝FY-MAX 小号叉栓式汽车保险丝FY-UF 大号汽车叉栓式保险丝FY-MF 管状|柱状汽车保险丝其他型号汽车保险丝过载保护器-CIRCUITBREAKER AR1/AR2系列过载保护器 W系列过载保护器 88/88A系列过载保护器 90系列过载保护器 91/91L系列过载保护器 97/98/98H系列过载保护器带开关系列过载保护器热敏电阻-NTC/PTCThermistor 负温度系数热敏电阻陶瓷正温度系数热敏电阻高分子正温度系数热敏电阻温度传感器湿度传感器本公司将继续通过ISO9000质量管理体系的有效实施，使涉及企业生产经营的各个运作环节，均严谨有序，不断制造出质优价廉、适销对路的产品参与市场竞争，使企业长期保持较强的经营获利能力。同时我们将长期重视与行业知名企业合作，争取最大限度的代理权，以最优惠的价钱把产品销售给客户。

<< 上一页：没有了 || 下一页：1206(3.2x1.6)贴片保险丝 >>